Demulsifiers: Waste oil emulsion treatment

Demulsifiers & Dispersant
Waste oil emulsion treatment

Our range of demulsifiers offer full phase separation of waste garage oils, slop and ballast fuels.

Treatment outcomes are designed to achieve the maximum yield of dry oil for recycling.

KEY PROPERTIES

Demulsifiers are a blend of coalescing agents, wetting agents and surfactants.

Coalesing agents destabilise the water in oil emulsion enabling water droplets to coalesce together into a separate phase.

Wetting agents are used to separate the solids phase from the waste emulsion. Surfactants are designed to minimise the volume of interphase emulsion between the oil and water phases.

APPLICATION AND KEY PRODUCTS

We have a wide range of waste oil treatment demulsifiers, reverse demulsifiers and dispersants.

We offer a free laboratory service to advise on the selection of the correct Demulsifiers appropriate to the emulsion being treated.

OT 775
OT 2375
OT 2456
OT 99X
WT 620 & OS 88
Disperse 1040

− De-Ashing Demulsifier
− Centrifuge Aid and Ship Ballast Demulsifier
− Garage Waste Oil Emulsions
− High Water Content Emulsions
− Waste Oil Sludge De-oiler
− Type 2/3 Oil Slick Dispersant

[MSDS]
[MSDS]
[MSDS]
[MSDS]
[MSDS] [2]
[MSDS]

APPLICATION

Typical treatment dosages vary widely from 750ppm to 3000ppm depending upon the emulsion.

For best results heat the emulsion to above 80°C, slowly inject the Demulsifier and mix until homogeneous.

After application of the Demulsifier dosing and pumping equipment should be switched off to allow phase separation to take place in a turbulant free environment.

AVAILABLE PACK SIZES

1000Ltr, 200Ltr.

SAFE HANDLING AND STORAGE

Store in original containers and avoid extremes of temperature.
For guidance on handling and disposal see Material Safety Data Sheet.


Manufactured & supplied by
Oil Technics Ltd. Linton Business Park, Gourdon, Aberdeenshire, Scotland UK DD10 0NH	Tel: +44(0) 1561 361515 Fax: +44(0) 1561 361001	Home page Contact us